Minimally invasive heart surgery refers to several approaches for bypassing blocked arteries. The minimally invasive procedures are less difficult and risky than conventional open heart surgery such as coronary artery bypass grafting (CABG). The minimally invasive procedures restore healthy blood flow to the heart without having to stop the heart and put the patient on a heart-lung machine during surgery. Currently, there are three types of these procedures: Patients who have one of these procedures instead of open heart surgery have a lower risk of complications associated with the heart-lung machine, such as stroke, lung problems, kidney problems, and problems with mental clarity and memory. Other benefits are faster recovery and reduced hospital costs.
MINIMALLY INVASIVE DIRECT CORONARY BYPASS (MIDCAB) This procedure is for patients with a blockage or blockages in the arteries on the front of the heart. (The left anterior descending (LAD) artery and its branches.) It allows the surgeon to perform bypass surgery without splitting the breastbone. A cut is still made on the patient's left chest to expose the heart. But unlike conventional open heart surgery, the cut is much smaller. Muscles in the area are pushed apart. A small part of the front of the rib (costal cartilage) is removed. Then the surgeon temporarily closes off the artery that lies underneath and frees its lower end. An opening is made in the pericardium, the covering of the heart. A device is attached to the heart to reduce its movement. Finally, the surgeon connects the artery below the blockage to the LAD artery or one of its branches. Once the other artery under the costal cartilage is reopened, blood flow bypasses the blockage and feeds the heart. A heart-lung machine is not required. This procedure offers the benefits of conventional open heart surgery but with less traumatic injury. The recovery may be closer to that experienced by angioplasty patients. However, the procedure is limited to those patients who need just one or two bypasses. OFF-PUMP CORONARY ARTERY BYPASS (OPCAB) During this procedure, the surgeon must cut open the chest and split the breastbone. A heart-lung machine is not used, however. An artery or vein is taken from one of the legs and used to make the bypass. Like the MIDCAB procedure, a device is used to restrict movement of parts of the heart so that the surgeon can operate on it while it is still beating. The surgeon can repair four to five vessels on the beating heart during the same procedure. The use of OPCAB has grown significantly because of its advantages over other procedures. Compared with patients undergoing conventional heart bypass surgery, those undergoing OPCAB: MIDCAB and OPCAB surgeries both take approximately 3 - 4 hours. ROBOTIC ASSISTED CORONARY ARTERY BYPASS (RACAB) RACAB is the latest advance in heart surgery. Surgeons use a robot to perform the bypass. The breastbone does not need to be split open at all. Surgeons do not have direct contact with the patient. They perform the operation while watching a video screen. As the technology becomes more advanced, the surgeon may perform coronary artery bypass from a distant site (that is, from another room or another geographical location).
|
|
Reviewer Info: Robert A. Cowles, MD, Assistant Professor of Surgery, Columbia University College of Physicians and Surgeons, New York, NY. Review provided by VeriMed Healthcare Network. Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.; ADAM Health Illustrated Encyclopedia, 05/15/2008 |